Sale
  • GEPRC Mark4 HD GPS Freestyle Quadcopter BNF w/ Caddx Nebula Nano V2 - 6S - PNP

GEPRC Mark4 HD GPS Freestyle Quadcopter BNF w/ Caddx Nebula Nano V2 - 6S - PNP

GEPRC has launched the Mark4 HD GPS, which is a stable, durable, and perfectly structured quad that features the Caddx Nebula Nano V2. It also comes with an added GPS, so that when the signal is lost or VTX is losing control - rescue mode on Betaflight can be activated. The Mark4 features G2306.5 motors, BL32 50A  4-In-1 ESC, and GEPRC G5x4.3×3 propellers.

This quad is mainly used for daily freestyle flying or taking HD video of the long-distance flight, and it comes in two versions: 4S-2450kv and 6S-1850kv. The flight time of 4S is about 40 seconds shorter than 6S.

Note: Now comes with the Caddx Nebula Nano V2 Camera!

 

VIDEO: BETTER THAN DJI MAVIC AIR 2 - GEPRC MARK4

 

Features

  • Full Soft Mounted FC System: Provides a clean operating environment for gyro.
  • Exquisite Assembly Process: Eliminate any potential installation problems.
  • Receiver: PNP / Frsky R-XSR / Frsky XM+ / TBS Nano RX
  • Integrated GPS, able to return to base in an emergency
  • Black Box: 8Mb onboard flash memory.
  • Weight:392g without battery
  • Caddx Nebula Nano V2
  • Ultra-lightweight design
  • Full 3K Carbon Fiber
  • GR2306.5 Motors

Specifications

  • Motors: GR2306.5 2450KV (4S) / 1850KV (6S)
  • Props: GEPRC G5x4.3×3

FRAME: MARK4 HD GPS Frame Kit

  • Mounting Holes: 30.5*30.5mm/20*20mm
  • Motor to motor: 225mm
  • Full 3K Carbon Fiber
  • Bottom plate: 2.5mm
  • Protect plate: 2mm
  • Side plate: 2.5mm
  • Size: 138*176mm
  • Top plate: 2.5mm
  • Arms plate: 5mm

FLIGHT CONTROLLER

  • Size: 36x36mm board, φ4mm with Grommets φ3mm
  • OSD: BetaFlight OSD w/ AT7456E chip
  • BlackBox: 16Mb onboard Flash
  • Firmware target:GEPRCF405
  • DJI FPV Air Unit Supported.
  • BEC Output: 5V,9V BEC
  • Type-C USB interface
  • IMU: MPU6000(SPI)
  • MCU: STM32F405
  • Integrated LC Filter
  • Baro: BMP280
  • UARTS: 6

50A 4-In-1 BL32 ESC 

  • Support DSHOT1200/DSHOT600, PWM, Multishot, OneShot
  • Firmware Version: GEPRC-BL32-4IN1
  • MCU: STM32FO51K86(32bit 48mHz)
  • Continuous Current: 50A
  • Input Voltage: 3-6S Lipo
  • Peak Current: 55A (5S)
  • Current sensor: YES
  • TelemetrySupported

Manual

Recommended (Not Included)


    Includes

    • 1x GEPRC MARK4 HD GPS Quadcopter w/ Caddx Nebula Nano V2
    • 1x GEPRC 5043 Propellers (Set of 12)
    • 2x Replacement Arms
    • 1x Connecting Wire
    • 1x Hardware Kit
    • 1x Battery Pad
    • 2x LiPo Straps
    • 1x Antenna